3 reasons not to clean and reuse a HEPA filter
Some air purification units come with washable filters. For example, electrostatic air cleaners are low maintenance units. The beauty of these units is that you can wash the filters many times and you won’t need to buy new ones. Therefore, you can save tons of money in the long run. However, you can also invest in a HEPA-based filter, as they are known to remove up to 99.97% of airborne particles. In this article we are going to talk about why you should not reuse a disposable HEPA filter. Keep reading to know more.
don’t vacuum them
If you think you can vacuum filters, you need to think again. The problem is that they come with a tough fiber that can trap up to 99% of airborne particles. So once these units get clogged, you can’t clean them no matter what.
Therefore, vacuuming these units is not a good idea. If you hold a filter, you’ll realize that no vacuum can suck up dirt from these units.
don’t play with them
If you use any method to clean the filters, you will only end up damaging the units. Once damaged, it will not be able to perform filtering functions. Therefore, it is no use touching or playing with them.
The only solution is to replace these filters as soon as they get dirty. Saving money on the old ones is not a great idea as it is a matter of health.
don’t wash them
If you think that washing the filters can clean them, you are again making a mistake. Although water can be used to clean the dirtiest filters, this method can create moisture. We use air purifiers to remove mold from our rooms.
Cleaning your purifiers can cause mold to grow. On these filters, moisture can allow mold to grow. As soon as mold starts to grow inside them, it will spawn spores and spread them around the room.
It is important to note that water can cause serious damage to filters. So no matter what method you try to dry them, they won’t work. In fact, the filters will not work properly once they come into contact with water.
Therefore, we suggest that you do not save a few bucks and opt for any of the cleaning methods described in this article. Instead, the only way out is to opt for a replacement one for your device.
conclusion
In short, these are just a few of the common reasons why you shouldn’t clean HEPA filters. Instead, what you should do is replace the filters as soon as you notice that they are not working properly due to clogged filters. Hopefully these tips will help you get the most out of your air purifiers.